Made of steel, these doors offer solidity second to none. The steel used (0.60
or 0.84 mm) combined with the injection of CFC free polyurethane foam, provides
for a high thermal resistance factor and sturdiness second to none. Even if
these doors are heavier, their hardware systems have been designed to last.
The G-2000 door model is made of 23 gauge steel on both sides of the door. The
G-3000 model is made of 20 gauge steel on the outside and 23 gauge on the
inside.
Please note that the accuracy of the colors displayed on the web
site may vary depending on the settings of your monitor.
Features
Hot-galvanized steel, gauge 23/23 for G-2000 and gauge 20/23 for the G-3000
doors. Smooth finish on both sides of the door.
Color: white only
Rustproof baked-on polyester paint. Can be repainted.
1 ¾ in. (44.5 mm) insulated door with high-pressure injected polyurethane foam
ensuring a high thermal-resistance rating of R-16.04 (k=0,357 W/m2K),
and the solidity of a composite material.
Solid mechanical overlap joint increases the weather tightness of the door and
prevents de-lamination.
Thermal break between the interior and exterior faces of each section.
Flexible tubular bottom weather stripping ensuring the weather tightness of the
threshold.
Flexible top weather stripping 2 ½ in. (64 mm).
14-gauge reinforcement plates placed in the interior of the door where hinges
and handles are attached.
Wood end blocks, guaranteed against cracking, provide a thermal break with the
exterior of the door. Aluminum end caps are available as an option.
13-gauge, 2 in. (50 mm) hardware tracks or 12-gauge or 3 in.(75 mm) industrial
tracks. Torsion spring. Sturdy galvanized steel suited to the door's usage.
Spring from 25 000 to 200 000 cycles are recommended for high cycle doors.
